基于局部轮廓特征的无人机头部检测跟踪算法

针对无人机的结构特点,提出了一种基于目标轮廓提取、轮廓自动分段、头部定位以及头部模板匹配四个模块的目标头部检测跟踪算法.首先对第一帧图像提取目标轮廓,并通过计算轮廓点的变化率,对轮廓进行自动分段,得到目标的4个局部轮廓点列,进而根据头部轮廓点列的特点,完成头部轮廓筛选,然后利用基于目标中轴的二次曲线拟合,实现头部顶点的...     

Yb3+,Er3+掺杂的SrAl2O4:Eu2+,Dy3+长余辉材料的发光特性

根据Dorenbos能级模型的推论,利用掺杂Yb3+和Er3+对典型的长余辉材料SrAl2O4:Eu2+,Dy3+(简称SAO:ED)的发光特性(发光强度和余辉时间)进行调制.在发光特性分析中,发展并使用了一种简便易行的解析模型,而不是常用的多项e指数衰减函数的经验模型.研究发现,正如Dorenbos所预言的,Yb+3...     

A≈110质量区奇A核形状演化研究

应用E-GOS（E-Gamma Over Spin）曲线方法研究了A≈110质量区奇A核结构随角动量增加的演化, 发现随着角动量的增加原子核的激发特性从振动逐渐演化为转动。 The E-GOS（E-Gamma Over Spin）curves were used to investigate the structure evolution in the odd A nuclei around A≈110 as a function of spin. The result shows that there is a clear transition from vibration to rotation while increasing spin.     

PN结伏安特性的实验研究

介绍了验证PN结伏安关系特性实验的实验原理,并利用绘图软件Origin7.5对实验数据进行处理.结果表明,PN结的扩散电流和两端的正向电压之间满足指数关系.通过与理论公式的比较,准确地测出了玻尔兹曼常数.     

食盐与心血管结局

介绍了食盐与心血管结局关系的最新研究结果,食盐摄入量与心血管结局之间呈J形关系;低盐和高盐都增加心血管危险;不支持普遍减盐推荐。     

碳包覆纳米铁镍磁性颗粒的合成

通过在双温控的化学气相沉积炉中热解四吡啶并卟啉铁镍混合物,合成了碳包覆铁镍纳米颗粒。原料中四吡啶并卟啉铁镍的质量比为7∶3;扫描电镜和透射电镜的结果显示碳包覆铁镍纳米颗粒形貌均匀,直径为100~300 nm;能谱结果显示碳包覆铁镍纳米颗粒是由铁、镍和碳组成;拉曼光谱证明产物有大量的缺陷存在,可能是由于球状结构上的碎片引起的;此外,磁性能测试表明室温下,碳包覆铁镍纳米颗粒有很高的饱和磁化强度,为56.3 emu·g^-1;而其产物的矫顽力趋近于零,呈超顺磁性,适合用于催化剂载体。     

不同粒径尿微晶的ζ电位、自相关曲线和聚集状态

采用纳米粒度仪和透射电子显微镜(TEM)比较研究了10例尿石症患者和10例健康对照者的尿液经不同孔径滤膜(0.22、0.45、1.2、3.0、10μm)过滤后,尿微晶平均粒径(d)、粒度分布、自相关曲线、ζ电位和聚集状态的变化。随着滤膜孔径由0.22μm增至10μm,患者尿微晶的d值由162 nm增至3 227 nm,自相关曲线平滑性变差,自相关时间(Ta)由1.92 ms增至2100 ms,ζ由-2.65 mV减小至-9.21 mV,TEM显示尿微晶尺寸差异大,部分尿微晶处于聚集状态。而对照者尿微晶的d值仅由187 nm增加至1 010 nm,自相关曲线平滑,Ta由1.40 ms增加至6.67 ms,ζ平均值由-5.22 mV减小至-6.89 mV,TEM显示尿微晶均匀分散,尺寸较小。上述结果表明:尿石患者的尿液体系不稳定,其尿微晶聚集程度高,导致尿石症形成的危险性增加。     

Critical Reynolds number in plasma flows on a stabilized plasmatron section

A technique for determining the criterion of transition from the laminar to the turbulent flow regime on a stabilized plasmatron channel section is proposed. The technique uses experimental data and the methods of numerical simulation of plasma flows. A criterial generalization of the experimental data which for the first time makes it possible to establish the boundary of transition from the laminar to the turbulent flow regime on a stabilized plasmatron channel section is proposed. The experimental results are in good agreement with the theoretical dependences derived in the study. A curve (analog of the neutral curve) separating the domains of existence of laminar and turbulent plasma flows in a cylindrical channel is constructed in the space of the plasmatron working parameters.Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 5, 2004, pp. 49–61. Original Russian Text Copyright © 2004 by Sinkevich and Chikunov.     

Slip flow of non-plasticized PVC compounds

Measurements on seven rigid PVC compounds were carried out with a slit rheometer working in combination with an injection moulding machine. Plastication of the compounds occurred in the screw of the plastication unit, which also forced the melt through the die with a controlled forward velocity. The rectangular slit had a length of 90 mm and a widthB of 20 mm. The heightH could be varied between 0.8 and 3.3 mm. Pressures and temperatures were recorded at several positions in and before the die. Measurements were carried out at shear rates from 10 to 2000 s^–1.When the reduced volume output was plotted against the wall shear stress _W , only four compounds showed master curves independent ofH, which is indicative of wall adhesion. In the other cases this plot did not produce such a master curve, but the plot of the mean velocity against _W was independent ofH (slip curve). This indicated that slip flow prevailed with a slip velocityv _G When, in the case of wall slip, the smooth inner surfaces of the die were replaced by surfaces with grooves perpendicular to the direction of flow, slip flow was prevented and the flow curves were shifted to much higher values of _Wc Above a critical value of the wall shear stress ( _Wc ) at which slip flow began, the output became nearly independent of _W . From the measurements made below _Wc a vs. relation for the shear flow could be derived, which was used to calculate the superimposed shear flow . Exact values of the slip velocity were then given by . Wall slip only occurred for compounds with a high shear viscosity, which corresponds to a high molecular weight (K-value).Dedicated to Professor H. Janeschitz-Kriegl on the occasion of his 60th birthday.     

MACRO AND MICROSCOPIC PARAMETER MAPPING RELATIONSHIP FOR RED SANDSTONE 1)

颗粒流离散元软件PFC2D在岩土工程中的应用十分广泛,存在的主要问题是如何标定其细观参数,目前大多使用"试凑法",此方法的缺点在于工作量大、效率低等,本文提出以反向传播算法(back propagation,BP)神经网络的方式代替此方法,利用PFC2D 内置的FISH 以及Python 语言对其进行二次开发,使之自动运行并获取40组宏细观参数样本。结果表明：BP神经网络可以快速准确地建立宏细观参数映射关系,误差均保持在0.01 以内,模拟得到的应力--应变曲线与室内试验曲线高度吻合,且无需大量的数据样本便可创建网络,效率较高;另外,经验证本文选用的平直节理模型,可以有效地解决平行粘结模型UCS/TS值偏小问题,确定平直节理模型可以更好地模拟岩石。